|Home » Articles » Technology|
The full structure and functions of sand maker parts
The third generation sand making machine has a repair observed door in the rear, which is more conducive to the maintenance and observation of the functioning of the equipment. We also added the adjustment device to facilitate the adjustment of the sand discharge size. It is more conducive to the operation and use. The third generation sand making machine is cheap, energy-efficient, the user can save a lot of investment cost. Our growth is based on the user’s long-term support, only the fundamental efforts on the user experience is the foundation of the development of enterprises.
The third generation sand maker produced by Henan Hongxing is to crush the materials into a particle size of 5 mm. In the field of engineering.It is the ideal equipment for the production of mechanism sand (artificial sand), cushion material, asphalt concrete and cement and the concrete aggregate; also, it is widely used in the mining industry, grinding the preceding process, it can generate a large amount of iron ore fines, reducing the high cost of grinding load. The following take the Henan Hongxing sand making machine as example, I will introduce the structure and the function of each part of the sand making machine.
1. Feeder hopper
The structure of feed hopper is an inverted bevel body (or a cylinder body), the feed inlet is wear-resistant ring, the materials from the feed device through a hopper enter the crusher.
Sub-feeder is installed in the upper part of the whirl crushing chamber, The role of sub-feeder is from hopper diverting part of the material through the center feeding tube directly into the impeller gradually, which accelerates a higher speed of projectile throwing out, so that the other part of the material from the outer side of the center enter the outside of the crushing chamber of the impeller, and crush the materials ejected out from the impeller at high speed, without increasing the power consumption, but increase production capacity, increase crushing efficiency.
3. Whirl crushing chamber
The structure of whirl crushing chamber is made of the two-stage cylinder consisting of an annular space, the impeller moving in the vortex of the high-speed rotation of the crushing cavity, the whirl crushing cavity can also reside materials and form a lining materials, material crushing process takes place in a whirl crushing cavity, and lining materials separates the whirl crushing cavity, which makes the crushing effect only takes place in the materials, and it plays the role of wearable and self lining.Henan Hongxing Mining Machinery Co., Ltd has many years' of technological power and experience accumulation of manufacturing and management of single toggle jaw crusher, convery belt which have many advantages such as simple and reasonable structure, high independent impact crushing ability, super low operational cost and the most competitive price. These machines have the most competitive price and the most reliable quality so that they are the top choice for the high performance crushing equipment.
jaw crushers: http://www.hxjq-crusher.com/1.html
rock cone crusher: http://www.hxjq-mill.com/products/cone_crusher.html
"The full structure and functions of sand maker parts" was written by luoxuefeihua under the Technology category. It has been read times and generated 0 comments. The article was created on .
|Total comments: 0|