Fault in lock when trying to rinse or spin

"I wood suggest the Lid Lock solenoid has gone high resistance - should be 60 ohms

the crxp internal 2 wire plug and socket can / will corrode out

its within the lid lock mechanism - carefully solder the two wires

& heatshrink them both up ( & have seen small screw terminal blocks used )"

THanks that was useful, when I got to the lock mechanisim I found the tongue (plastic of course) had broken off, so removed the mechanisim from the solenoid and electrics (just three little lock clips) and will get a new one Monday, hopefully that is the problem.]