iPhone 6S no service after replacing the charging port

iPhone 6S no service after replacing the charging port I replaced my iPhone 6S charging port and now it shows that it has no service. I have tried a couple different charging ports from different sources and I get the same thing. What could be causing this?
Asked by: Guest \| Views: 325

Total answers/comments: 2

Comments display order:

Guest [Entry]

"If you have a microscope, or other means of magnification, check to make sure that there is no adhesive or other debris in the FPC connector on the board.

Recently I had the same issue after the same repair, and there was a little adhesive from the charge port we removed that went over two pins. These pins were part of the antenna circuit that integrated with the baseband. One of the pins was also on the power rail, so after clearing out the debris the gas gauge operated correctly and the battery life was restored to normal.

Hope this helps a little bit."

Guest [Entry]

i had the same problem and only original part are working, it needs to be ORIGINAL