washing machine leaking water from coin trap

washing machine leaking water from coin trap My 14 month old (warranty expired) front loader Samsung wf45k6500av/a2 is leaking water from around the drain pump filter cap during the whole cycle.
Asked by: Guest \| Views: 149

Total answers/comments: 5

Comments display order:

Guest [Entry]

"Hi @kellyrich1123 ,

Looking at the 2nd video posted above, it appears as though there is a black rubber “o” ring under the screw cap which provides the watertight seal, when the cap is screwed on tight.

Check that it isn’t split, cracked or worn, creating an imperfect seal, when the cap is screwed on, so that the water can get through."

Guest [Entry]

"I ordered a replacement (without the child proof knob which I believe was preventing my filter from tightening all the way). The part that I order which fit for my washing machine was: DC97-16991A. The part that is “supposed” to go there(the one with the child proof knob) is part number: DC97-16991B, I am assuming the “B” is for the child proof knob version.

Samsung DC97-16991A Assembly Filter https://www.amazon.com/dp/B01AQHQOTM/ref..."

Guest [Entry]

"FIXED!! :D Found the solution!!!! I had the exact problem. Which was extremely aggravating. Out of my rage, I examined the filter and cap thoroughly and there wasn’t a single problem with the part. So thinking to myself there is no freakin way this shouldn’t seal… so I went back to the dumb washer and man handled the cap with all my strength and BOOM! Problem fixed. I guarantee you aren’t tightening the lid enough. So call your husband or man around the house and ask them to show off their brute strength bc that’s the issue.

P.S. I called Lowe’s hotline and ordered the F-ing replacement part which was none refundable before I fixed it. FML"

Guest [Entry]

"Man handled it with pliers to get the leverage!! Pushed and turned right till stopped turning smoothly. I had originally tightened till it started clicking, so thought was on all the way. NOPE!!

You have to push in like heck, just get mad enough, you fine the strength, lol!! Turn right till stops turning smooth and clicks again.

holy mother of"

Guest [Entry]

"In addition to @jayeff excellent answer, I remember I used to use a gel to coat the O rings on my SCUBA gear to prevent them from leaking. This product may help insure a solid seal:

https://www.webstaurantstore.com/petrol-..."