Why am I not getting an output?

Why am I not getting an output?

My computer was working fine. It's been just 2 days since I built it. Everything turns on but the LEDs of the top fans don't light up and the RGB of the wraith spire cooler doesn't turn on. Also there's no output on my monitor. Kindly help at the soonest time possible. Also when I disconnected my CPU power cable the light on my wraith prism cooler starts to glow up.

Asked by: Guest | Views: 201

Total answers/comments: 2

Comments display order:

Guest [Entry]

"Hi,

It appears that the computer is not passing POST (Power On Self Test).

Try connecting a system speaker to the motherboard and then check what the beep error code is when trying to start the computer.

Here’s a composite image of where to connect the speaker, taken from the user manual and what a suitable one may look like.

.

Here’s a list of what the various beep error codes mean."

Guest [Entry]

"Hi there,

Do the fans work just not the leds on them? If so, it may be simply be that the leds are faulty or not properly connected.

For the no signal issue, remove the gfx card plug the video cable into the on board graphics port and see if you get display. If you get a picture then shut down again and reinstall the card, install the power connectors to the card.

If you have a multi meter you can measure the voltage on the 12v connectors, one of the rails may be faulty.

If it still does not work then it is likely the motherboard is faulty and cannot distribute the power that is required."