Home » Questions » Computers [ Ask a new question ]

win vista sp2 x64 still won't install

win vista sp2 x64 still won't install

Since Vista SP2 came out I have been trying to update, unsuccessfully. I always go through the whole installation process, the system reboots, says it is in Step 3 of 3 and aborts with a message similar to "Service pack did not install. Reverting changes." and then presents me with my login/password to enter.

Asked by: Guest | Views: 33
Total answers/comments: 2
Guest [Entry]

"ok so I FINALLY got to install this frigging service pack!
what did it:

In case something goes wrong: BACKUP and have all your hardware drivers INSIDE your hard disk drive (in case you lose CDROM or web access).
download the standalone installer from http://catalog.update.microsoft.com/ (IE only, obviously)
do an in-place upgrade as described by Matt H in http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/95b8cb0f-9d2f-4f3d-b28b-aeb731c5c90c
step two took more than three hours in my machine. Once finished it may not recognize some of your hardware. IGNORE any ""find a driver for this hardware"" message. Just go ahead and run the SP2 installer.

After about 30/40 minutes I finally got the ""Windows Vista Service Pack 2 is now installed"" window. No rollbacks, no hassle. If any hardware is still unrecognized just go through your normal driver install.
Just so you do not miss Matt H's explanation of in-place upgrade here it goes:

You can upgrade in-place, which means you can install Windows Vista and retain your applications, files, and settings as they were in your previous edition of Windows. An In-Place upgrade is actually a repair installation using the upgrade option. If you have installed Service Pack 1 for Windows Vista and your original Windows Vista DVD does not include this Service Pack, then the Upgrade option will be disabled, thus preventing you from doing an in place upgrade. The reason for this is that, by installing Service Pack 1 your system is, in effect, newer than that of your original Vista DVD (the only exception to this is if you have a slipstreamed copy of Windows Vista including Service pack 1).
So, if your original Windows Vista DVD does not contain Service Pack 1 you will need to Uninstall Service Pack 1 from your PC prior to attempting the upgrade.
Note: After performing In-Place Upgrade, your personal data and installed programs will not be removed but we may need to run Windows Update to install all the available updates for your system to update these system files to the current version. This troubleshooting process is time consuming and may take several hours to complete.
If you would like to perform the In-place Upgrade, refer to the following steps.

Start the computer by using the current Operating System.

Insert the Windows Vista DVD in the computer's DVD drive.

Use one of the following procedures, as appropriate:

• If Windows automatically detects the DVD, the Install now screen appears. Click Install now.
• If Windows does not automatically detect the DVD, follow these steps:
a. Click Start, click Run, type Drive:\setup.exe, and then click OK. Note Drive is the drive letter of the computer's DVD drive.
b. Click Install now.

When you reach the ""Which type of installation do you want?"" screen, click Upgrade to upgrade the current operating system to Windows Vista.

Please run Windows Update again as you will need to download and install the most current updates.

If you do not have the Windows Vista Installation DVD, I suggest contacting your PC manufacturer or our Customer Service to order a backup disk."
Guest [Entry]

"Have you tried this? http://support.microsoft.com/kb/910336
You get a 0x80070002 error code which that link describes how to resolve."