Inspection light on after oil change

Inspection light on after oil change I have checked all the fluids and replaced the oil and oil filter. Now I have an inspect (Inspection light on) in dash. I tried to reset and it remains on during starting only. Can someone tell me what I should do next?
Asked by: Guest \| Views: 221

Total answers/comments: 3

Comments display order:

bert [Entry]

"For Keyless Start:

Start with car turned off:

1. For Inspection Reminder Reset: Turn on Emergency Flashers. Then press and hold Reset/0.0 Button on instrument cluster and push the Engine Start button (without starting engine - foot off brake).

2. For Oil Change Reminder Reset: Don't turn on Emergency Flashers. Then press and hold Reset/0.0 Button on instrument cluster and push the Engine Start button (without starting engine - foot off brake).

For Key Start:

Start with car turned off:

1. For Inspection Reminder Reset: Turn on Emergency Flashers. Then press and hold Reset/0.0 Button on instrument cluster and Turn key to ""ON"" without starting the car. Look at dash for further instructions.

2. For Oil Change Reminder Reset: Don't turn on Emergency Flashers. Then press and hold Reset/0.0 Button on instrument cluster and Turn key to ""ON"" without starting the car. Look at dash for further instructions."

bert [Entry]

"For vehicles with ‘Basic Display' (wrench icon and INSPEC_ message)

Reset the Inspection reminder:

1.Switch off the ignition.

2.Switch on the emergency flashers

.3.Push the . button in the instrument cluster and hold down.

4.Switch on the ignition.

5.Release the . button and push the button in the instrument cluster within about 20 seconds.

6.Switch off the emergency flashers.

To reset Service reminder:

Same process except don't activate hazard lights.

P.S. don't reset Service indicator unless the vehicle has been serviced or incorrect data will be displayed."

bert [Entry]

I reset mine and all is fine for approx two weeks then it tells me I need an oil change again! Any Clues?