only green light is on. tv not work.

"Hi,

What is the model number of the TV?

Try a power refresh and see if that works.

Turn off the power at the power outlet and disconnect the TV power cable from the outlet.

Press and hold the TV Power button for 30 seconds and then release.

Reconnect the TV power cable to the power outlet and switch on the outlet.

Try to turn on the TV and see what happens."

"Finally found the solution. There is 6 large screw holes on the back of the tv, where you mount the wall mount. 4 of them are used to mount the tv and two center ones only holding the back cover. Looks like the guys who installed the tv used bottom and center holes leaving top ones empty. Longer mount screw went thru the frame pushing FB1 board in metal case toward the panel. Board under pressure of heatsinks broke after few years.

After I changed the board it still didn’t worked. while switching boards 2nd time I noticed that it doesn’t lie evenly in place. The metal stands under the board were bent down, right by the AU board, causing the two large connectors to not align correctly. fixed those and voila.

Interesting fact is that tv was on the wall in my living room for 5 years, then it was moved to basement also mounted, and it was working for 2-3 years, rarely used but working."

I had this exact problem with my screen black after powering on. Simple fix, these t.v.’s are older…digital signals weren’t fully implemented when they were made. There is a firmware update which will solve this problem I’m almost certain. Go to the Sony website and type in your model number and follow the instructions, you’ll need a USB key to download the firmware to and just plug it into your tv and in 10 minutes you should be good!

buy lipitor 80mg for sale <a href="https://lipiws.top/">oral atorvastatin 40mg</a> order atorvastatin 20mg