Home » Questions » Information [ Ask a new question ]

Panasonic 55DX600U Turns on then turns off after 1 second.

Panasonic 55DX600U Turns on then turns off after 1 second.

I have a 55DX600U panasonic 4k lcd tv. The TV was working fine but when I switched to TV tuner it turned off then turned back on for only a few seconds and now won’t turn back on for longer than 1 second. When it turns off I get an endless slow flashing red light.

ANSWERS:

"@jenkinsb01 could be a power board issue as well as the tuner board etc. . we would need to see your boards. Post some good pictures of the boards with your question Adding images to an existing question

You will need a multimeter that you can use to measure some voltages etc. to determine which board may have failed.

Is there a way to do a factory reset without turning on the tv? No, there is not. It would be reset once you pulled the power cable and disconnected all inputs. Then hold the power button for a minute or so. After that plug it back in. You can also start by downloading the service manual from here and go through the no power failure to see if that will lead you to the right board."

Asked by: Guest | Views: 168
Total answers/comments: 0