Home » Questions » Information [ Ask a new question ]

What is fault 49

What is fault 49

What dose I need a service ,fault 49 mean .

ANSWERS:

"@stevew Error Fault Condition – Water Inlet Valve Fault.

Repair or Check – Unplug the washer from power. Reconnect any non secure wires on the water inlet valve. Replace the wire harness if it is found to be damaged. If the wiring is okay then measure the resistance of the water inlet valves using an ohm meter. If the resistance of each water inlet valve solenoid is not 60 to 62 ohms then replace the complete water inlet valve assembly.

Parts for Replacement – Water Inlet Valve Assembly or Wire Harness from here"

"The motor controller P7 ?? Is faulty

pete"

Asked by: Guest | Views: 30
Total answers/comments: 0