Home » Questions » Information [ Ask a new question ]

No power but drum light is on...

No power but drum light is on...

Kenmore Elite HE3 dryer. I’ve used previous questions pertaining to my issue/similar issues. Thermal fuse, thermistor, door switch all are fine. Drum light turns on and off. Control panel does not have any power.


I had the exact same issue where the drum light worked fine with the opening and closing of the door. My problem turned out to be the “End of Cycle Signal" button was wedged in behind the exterior face cover. Once I relieved that pressure and the button popped back to its normal position, the dryer worked perfectly. I'd suggest checking all those buttons on the front panel to make sure they aren't stuck in.

Check for a loose wire the drum rolling around can loosen the wires pull all the wires off the control panel and reattaching

Asked by: Guest | Views: 301
Total answers/comments: 0