Genuine Cerwin Vega tweeter diaphragm for DT3 tweeter, used in AT and RE series. If your tweeter is blown, this will fix it. Easy to do. Take out your tweeter, lay flat, and remove the two small screws that hold the magnet to the plastic frame. Lift the magnet straight up. These kits come with new gaskets, but if the gasket sticks to the magnet (which it usually does) you can just leave that one on. No real need to change it. Then LOOK at the way the diaphragm is in your old tweeter. The round plastic holder has a thinner tab toward the outside edge, and thicker one toward the inside. You'll see what I mean. Pop out the old plastic ring. Sometimes the old mylar (chrome dome piece) will stick to the frame. No worries, it's shot anyway, just yank it off. Put the new diaphragm in the frame just like the old one came out. Now, the only part you have to be careful on. Slowly lower the magnet back over the new diaphragm. Best to look straight down on it, and keep the screw holes lined up. Then put the two screws back in, and you have a new tweeter ready to get back to rocking. Yay! 19 years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks! (Note:I will be away from noon July 16th to July 20th. Any purchases made will be shipped promptly on the 21st!)
