Mic issues after screen replacement

"Hey buddy,

I am an iPhone repair tech. The mic for loadspeaker situations like skype, recording video, and speaker phone, is located in the same area as the ear speaker. If your screen has been replaced before on the iPhone 6, it may not have been lined up correctly. It's a very small whole left of the proximity sensor is the screen is faced down. The solution is to make sure the whole is in line, and that the 4 gold contacts on the ear speaker are making contact with the 4 gold contacts on the Front Camera/ear speaker flex cable. If that doesnt work, the flex cable needs replacing. If the sounds going through to the other person is just faint but coming through then it defiantly is just mic whole position.. The flex cable may have been cut or bent to harshly too.

iPhoneDocNYC.com I'll answer any questions.."

"all apple BS

The siri mic is broken

There are 3 mics and that one is broken and cannot be fixed

look on line it is a common problem

buy a DIFFERENT model I phone or use a plug in microphone or blue tooth"

camera / mic & sensor assembly replacement, make sure mesh is clear and clean.

The hole of the mic in some screens is covered with glue, you have to remove it or make a Little hole to get it working again!!!

Check Your Proximity Sensors Connection for sure. Line Up the Gold contacts, also check for any tears.

Well I just replaced my front camera flex cable with all those things in it to get my front camera working again after screen replacement. Thankfully everything works except the recorder. No voice texting no Siri. So I’m reading all of this thinking I will have to reinstall that brand new flex cable that I bought and line it up better I guess. I’m a girl… There’s lots of videos on YouTube regarding these very things however some of the men showing you how to do it have big fingers and it’s hard to tell what goes where