Home » Questions » Goods and Services [ Ask a new question ]

What if my camera got put in the washer and got wet

What if my camera got put in the washer and got wet

What do I do if camera got wet

Asked by: Guest | Views: 242
Total answers/comments: 2
bert [Entry]


As you know water and electronics and electricity are not a good mix.

The water causes corrosion and provides circuit paths for the electricity which were not in the camera's operating design and could damage the components.

First do not turn on your camera and then you need to remove the battery as soon as possible from the camera to minimize any further damage.

Then you need to dis-assemble the rest of the camera and clean all the affected parts using Isopropyl Alcohol 90%+ (available from electronics parts stores) to remove all traces of corrosion and water. Do not use ""rubbing alcohol"" as in some cases this is only 70% IPA or less, can contain scents and is not as effective. If you do use it, check the label to verify the amount of IPA.

Here is a link that describes the process.

Electronics Water Damage

As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the boards.

Hopefully after you have done all this the camera might possibly work correctly again.

Here is a link to the ifixit guide(s) for repairing your camera, which may be of some help. Samsung TL220 Repair

Here’s a link to a video, which shows how to dis-assemble your camera, which may also be of some help."
Fmquso [Entry]

oral atorvastatin 20mg <a href="https://lipiws.top/">order atorvastatin 10mg generic</a> atorvastatin 10mg oral