Kenmore 100 washing machine fills with water but won't start
My kenmore 110 series washing machine will fill up but that’s it, none of the settings seem to work to get the machine to actually run (previous load finished normally trying to started a new load). I have checked and the outlet it’s plugged into is getting power so that’s not the issue. I have unplugged the machine for 5+ min to reset it and that didn’t fix the issue.
If the water drain duct is blocked by lint or some objects, chances are you washer won’t start. Usually washer have sensors for all functions, so if one function is disabled the whole process stops. Check drain duct after you carefully empty the drum (there must be instructions for this in your user’s manual).