Home » Questions » Information [ Ask a new question ]

Kenmore washer water continues to fill overflows on all cycles

Kenmore washer water continues to fill overflows on all cycles

Kenmore washing machine will not sop filling on all cycles and all water levels.

ANSWERS:

"Mamie,

If your Kenmore 110 Series Washing Machine is not draining after a wash cycle, see the Kenmore 110 Series Washing Machine Won’t Drain problem page for possible causes and solutions.

The pressure switch/water level switch faulty or the hose connecting the switch to the drum may be off/clogged/ or have a hole in it, or there could be a fault in the water fill valve solenoid which may be stuck open from debris or just worn out. Check out the following video. for more instruction on how to diagnose wash machine overfilling. Hope this helps. Good luck.

https://www.youtube.com/watch?v=jzKBUI5D..."

Asked by: Guest | Views: 294
Total answers/comments: 1
Rudsyn [Entry]

atorvastatin 80mg generic <a href="https://lipiws.top/">lipitor cost</a> buy lipitor 20mg for sale