Home » Questions » Information [ Ask a new question ]

Noisy wobble in spin cycle even after rebalancing

Noisy wobble in spin cycle even after rebalancing

There is a very noisy wobble in spin cycle even after rebalancing. I would like to verify problem, (tub bearing & seal kit/Drum w/bearing) locate needed parts, and get repair instructions/manual.

ANSWERS:

"@alr , Al Russ , could be a cheap repair if caused by worn support pads, quite common and said to be almost always the cause at link 1st below. Other links also informative and may aid in diagnosing your washers issue. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.

http://www.davesrepair.com/DIYhelp/DIY28...

http://www.partselect.ca/Models/11024932...

http://www.partselect.ca/Models/11024932...

http://www.partselect.ca/Repair/Washer/S...

http://removeandreplace.com/2015/07/27/w...

http://www.searspartsdirect.com/model-nu..."

Asked by: Guest | Views: 96
Total answers/comments: 0