SMD resistors value on F&P motor control board SD P7CP ver 48 2010

"Hi @annakilligrew ,

Just thought you'd like to know that searching online using the board number only, (421389NAP) gives plenty of results for the board and I was hoping that there would be one shown without the protective plastic cage so that the board itself and possibly the resistors could be seen. Unfortunately this is not the case. You may have better luck using this method.

Sometimes you may be lucky at metal recyclers that they have your model washer and will let you look at or even take the part. It never hurts to ask ;-)

You may even be luckier still and find one on the kerb at the next kerbside hardware pickup in your area. If you have this of course.

The board is considered disposable by F&P and that seems to be the reason why there are no schematics available (none that I could find out about anyway).

If you decide to replace the board with a replacement (plenty available online) be aware of the Note contained in this link

Good Luck!"