Home » Questions » Computers [ Ask a new question ]

What type of adhesive or glue can I use for the lcd & glass?

What type of adhesive or glue can I use for the lcd & glass?

What type of adhesive is used to adhere the LCD and the GLASS together when re-assembling the phone back together. The parts that I have ordered the glass and LCD assembly did not come pre-assembled what is the best solution for this?

Asked by: Guest | Views: 103
Total answers/comments: 5
Guest [Entry]

"Burt

@burt


Rep: 109




1


2"
Guest [Entry]

On the unibody MacBooks (Pro) they apparently use standart 3M doublesided tape. I think that'll be alright for the iPhone too.
Guest [Entry]

I used a good guide on lcdseparatormachines.com that showed me how to apply the loca adhesive onto the lcd so I did not have any bubbles. Very useful. Make sure you have a mold for your phone so the lcd is aligned right.
Guest [Entry]

I use oca which is great but you have to invest a lot of money on the equipment. But the results are very professional. Good luck loca won't work good.
Guest [Entry]

"i am looking for a way to use oca without an autoclave.

i think oca is the best way to do it but i have not experience yet, and no money to buy an autoclave of course....today arrived my hot plate! :) i am just starting on this. i did my first i4 lcd separation today! :) (happy like a kid)

i have some ideas. my best friend does work with fiberglass on sail boats and uses some kind of vacuum bags + vacuum pump to take bubbles out. he is going to help me, next week/days ill tell all of you how the experiment is going.

Mrandes you are just great! i will probabably email you to ask you, thanks for your comment, very very helpfull for me. thanks man. i still have many questions like

how many degrees for heating the oca and preassure are needed?

is it heating the way to cure oca glue? or does it need uv light after?

will work with a proffesional vacuum pump?(only near 1atm presure, autoclave makes more yes?).

Can i use a vacuum pump and a special vacuum bag like my friend says,

staying inside the bag on the hot plate lets say at 75C. degrees? my friend says that the bag is heat resistant. that would do preassure and heat for oca working right? could it work?

that is what i am about to try this week end, using a broken lcd of course... :)

let see... im sure we can find a way to do it.. ;)

have fun!"