I can't fold my scooter no matter how hard I try?

"First, make sure you turn the Joint release latch located right behind the front wheel of the scooter.

As you turn the latch, fold your scooter and it should fold easily.

If it doesn't fold, be sure that the scooter's handlebars aren't blocking the scooter from folding fully and the alignment wheels at the bottom of the handlebars are in-line with the folding mechanism.

If your scooter is still not folding, it may be due to debris stuck at the quick release latch. To find out how to disassemble your scooter and remove the debris, visit the Quick Release Latch Guide on the Razor A2 Device Page.

Visit the Razor A2 Troubleshooting page to find any more problems with the folding mechanism."

http://www.youtube.com/watch?v=brvrzBIhT...

I just bought a 9 year old Razor scooter at a thrift store for my grandson and it has the same problem with folding. The latch behind the wheel moves BOTH directions. The key is that the latch easily moves one direction but requires the movement of the bar to move the opposite direction. If you wiggle the handlebars forward and backward while working the latch lever you will find that it eventually clicks and releases. When you figure this out you can use the orientation of the scooter to assist you to fold it up quickly.

Try to see if there is a screw in front where it fold loosen it if it folds look inside the bottom of the folding area and adjust screw under there