Internal fuse on mother board

Internal fuse on mother board

Hi I've stripped down my Xbox one kinect 2.0 as it had stopped working an I discovered that the fuse had blown an me being me thinking it would be easy to find a replacement for it just got down to repairing it an didn't take any pictures lol so I was wondering if you had any pictures an know the size an voltage plz as I've found a company who might have them an for the life of me can't remember these thanks oh an its the internal fuse on the mother board thanks

Asked by: Guest | Views: 295

Total answers/comments: 3

Comments display order:

bert [Entry]

Tried the fuse above, doesnt work.

bert [Entry]

"Quick and easyish guide.

Disconnect the kinect from the Xbox.

Do a hard reset of the box and plug in the money. If the kinect comes on for a bit and then shuts off without the fan starting then this will probably work.

Follow ifixits teardown guide. Ignore the part where they say remove the cord first. Nearly impossible to unplug it first. Once the fan assembly is undone it will come out like any usb3 cable.

Remove the fan and look up how to make a computer chassis fan into a USB fan. Take the wires from the fan cut off the end of USB and solder them together. Then just plug that into a USB charger.

The fan will continuously but doubt it's pulling a lot of energy and you can always unplug it when you need too.

Edit: I should note that I'm using the original fan."

bert [Entry]

"I have found a fuse, but you have to solder it in. Since the old fuse is plug in you can cut the wires and solder or just solder directly to the pins/board.

For sell on eBay listing# 291848948937"