Home » Articles » Health

OH&S Program - Basic Components

OH&S Program - Basic Components
"""An occupational health and safety (OH&S) program is what, exactly?

A clear plan of action created to avoid accidents and occupational illnesses is known as a health and safety program. Most Canadian jurisdictions have laws governing occupational health and safety that require some kind of program. A health and safety program must, at the very least, have the components mandated by applicable laws. The general components of an OH&S program are reviewed in this document. If you have any questions about specific standards, get in touch with the OH&S authorities in your area. Other OSH Answers documents have more information on these components. Due to the differences across organizations, a program created for one may not be the best solution for another. Always adjust the OH&S program to your workplace's specifications and demands.

A policy statement is what?

An organization's occupational health and safety policy is a statement of principles and general rules that guides action. Senior (or top) management must be committed to ensuring that the policy is carried out with no exceptions. The health and safety policy should have the same importance as the other policies of the organization. The policy statement can be brief, but it should mention: Management's commitment to protecting and promoting the safety and health of workers, and preventing injuries and illnesses. The objectives of the program. The organization's health and safety philosophy. Who is accountable for the health and safety programs. The general responsibilities of all managers and workers. That health and safety shall not be sacrificed for convenience or expediency. That unacceptable performance of health and safety duties will not be tolerated. The policy should be: Stated in clear terms. Signed by the current President or Chief Executive Officer. Kept up-to-date. Communicated to each worker. Followed for all work activities. The following is an example of an occupational health and safety policy statement: ABC Transport To all employees January 1, 2021 At ABC Transport the safety and health of our workers comes first. Management is committed to doing everything possible to prevent injuries, to promote prevention, and to maintain a safe and healthy environment. To this end:1) all supervisors are responsible for ensuring that their workers are trained in approved safe work procedures and to ensure that workers follow safe work procedures and all related regulations;2) all personnel are required to support the OH&S program and make safety and health a part of their daily routine and to ensure that they are following safe work procedures and relevant regulations;3) all personnel will be held accountable for implementing this program; and4) all relevant laws and regulations are incorporated in our program as minimum standards Signed by President For more information, please also see the OSH Answers’ Guide to Writing an OHS Policy Statement.

What are the program elements?

While organizations will have different needs and scope for specific elements required in their health and safety program, the following basic items should be considered in each case: Individual responsibility. The establishment and role of the health and safety committee or representative. Applicable health and safety legislation requirements, and organizational health and safety rules. Safe work procedures. Worker orientation. Training and education. Workplace inspections. Hazard identification, assessment, and control Reporting and investigating incidents. Emergency planning. Medical and first aid. Health and safety promotion, including psychological health and prevention of harassment and violence. Workplace specific items. Review of the health and safety program.

What are individual OH&S responsibilities?

Health and safety is the joint responsibility of management and workers. Managers and supervisors are accountable for non-compliance to health and safety legislation. Responsibility may be defined as an individual's obligation to carry out assigned duties. Authority implies the right to make decisions and the power to direct others. Responsibility and authority can be delegated to others, giving them the right to act for others, such as supervisors. It is important to note that, while some responsibilities can be delegated, the supervisor remains accountable for seeing that they are carried out. Individual responsibilities apply to every worker in the workplace, including the President or Chief Executive Officer. Stating these responsibilities means that all workers will then know exactly what is expected in health and safety terms. To fulfill their individual responsibilities, the people must: Know what these responsibilities are (communication required). Have sufficient authority to carry them out (organizational issue). Have the required ability and competence (such as those acquired through education, training or certification). Once all these criteria have been met, safety performance can be assessed by each individual's supervisor on an equal basis with other key job elements. Health and safety is not just an extra part of a worker's job: it is an integral, full-time component of each individual's responsibilities.

What are examples of the responsibilities of workers?

Examples of responsibilities of workers include: Using personal protection and safety equipment as required by the employer. Following safe work procedures. Knowing and complying with all regulations. Reporting any injury or illness immediately to the supervisor or manager. Reporting unsafe acts and unsafe conditions to the supervisor or manager.. Participating in the health and safety committees or as the representative.

What are examples of the responsibilities of supervisors?

Examples of responsibilities of first-line supervisors include: Instructing workers to follow safe work practices. Enforcing health and safety regulations. Correcting unsafe acts and unsafe conditions. Ensuring that only authorized or adequately trained workers perform tasks or operate equipment. Reporting and investigating all incidents. Inspecting the areas they have control over and taking remedial action to minimize or eliminate hazards. Ensuring equipment is properly maintained. Promoting safety awareness in workers.

What are examples of the responsibilities of management?

Examples of responsibilities of management include: Providing a safe and healthful workplace. Establishing and maintaining a health and safety program. Ensuring workers are educated, trained or certified, as required. Reporting incidents and cases of occupational disease to the appropriate authority. Providing medical and first aid facilities. Ensuring personal protective equipment is available and maintained. Providing workers with health and safety information. Supporting supervisors in their health and safety activities. Evaluating health and safety performance of supervisors. Ensuring the health and safety program is reviewed at defined intervals. Ensuring any changes necessary as the result of this review are implemented.

What are examples of responsibilities of safety coordinators?

Examples of responsibilities of safety coordinators include: Advising all workers on health and safety matters. Coordinating interdepartmental health and safety activities. Collecting and analyzing health and safety statistics. Providing health and safety education and training. Conducting research on special problems. Attending health and safety committee meetings as a resource person. Resolving reported health and safety issues. Ensuring the timely implementation of corrective and preventive actions with supervisors and management.

What is the purpose of a health and safety committee?

An effective safety program needs the cooperative involvement of all workers. A health and safety committee is a forum for collaborative involvement of employees representing both labour and management. Such committees are legal requirements for organizations of a specified minimum size in all Canadian jurisdictions. When a committee may not be required, a worker representative may be appointed. The responsibilities of members of the committee or representative are detailed in the health and safety legislation across Canada. A health and safety committee brings together workers’ in-depth, practical knowledge of specific jobs and management's overall overview of job interrelationships, general company policies, and procedures. The employer must establish a committee that is organized and operates in compliance with the law, is effective, involves the widest range of workers and management, and provides resources (e.g., time, money, meeting rooms) so the committee can do its work. To function properly, the committee needs an appropriate structure, a clear statement of purpose and duties, and standard procedures for meetings. The committee does this by establishing terms of reference and the employer provides support by allocating adequate resources. Common terms of reference include: Stating senior management's commitment to respond to the committee's recommendations. Defining how long a person will serve on the committee (if not specified by legislation). Establishing how a committee member will be chosen. Establishing how often a committee will meet, conduct inspections, etc. How the employer will respond to the committee’s recommendations. Each organization should set up their own terms of reference. More information is available in the health and safety committee documents listed below: Joint Health and Safety Committee - What is a Joint Health and Safety Committee? Joint Health and Safety Committee - Creation Joint Health and Safety Committee - Effective and Efficient Joint Health and Safety Committee - Measuring Effectiveness Joint Health and Safety Committee - Structure The health and safety committee members should be active participants in consulting, developing, implementing, and monitoring all phases of the health and safety program.

Why are safe work procedures established?

Government health and safety regulations represent minimum requirements. In almost all cases, organizations will exceed these regulations with rules or procedures that are specific to the organization, the work being done, the equipment used, etc. We need rules – to protect the health and safety of workers – but there are dangers in having either too few or too many rules. Too few rules may be interpreted as a sign that health and safety are not important, or that common sense is all that is required to achieve them. Too many rules may be seen as not treating workers as thinking adults and makes enforcement of all rules less likely. Following are some guidelines for establishing rules: Rules should be specific to health safety concerns in the workplace. The health and safety committee should participate in their formulation. Rules should be stated in clearly understandable terms. Rules are best stated in positive terms (""""workers shall"""" not """"workers shall not""""). The reasons for the rule should be explained. Rules must be enforceable since disregard for one rule will lead to disregard for others. Rules should be available to all workers in written form, in the languages of communication of workers. Rules should be periodically reviewed to evaluate the effectiveness and to make changes for improved effectiveness. Compliance with health and safety rules should be considered a condition of employment. Rules must be explained to new workers when they start work or if they are transferred or retrained. After a suitable interval, these workers should be briefed to ensure they understand the rules applicable to their work. The employer must establish procedures for dealing with repeat rule violators. Supervisors are responsible for correcting unsafe acts, such as a breach of rules, and they must be supported in this duty. Points that should be considered in establishing procedures on this issue are: Ensure that workers are aware of the rule. Ensure that workers are not encouraged, coerced, or forced to disregard the rule by fellow workers. All rules are to be followed. All violations will be managed. Action is taken promptly. The role of discipline is that of education, not punishment. While having guidelines for penalties for the first offence or infractions may be desirable, some flexibility is required when applying the guidelines since each case will vary in its circumstances. Action is done confidentially, consistently, and recorded.

How do you establish safe work procedures?

Safe work procedures are the safest way of doing a job, job instruction, monitoring performance, and incident investigation. Job safety analysis (JSA), also known as """"job hazard analysis"""", is the first step in developing the correct procedure. In this analysis, each task of a specific job is examined to identify hazards and to determine the safest way to do the job. Job safety analysis involves the following steps: 1. Select the job. 2. Break down the job into a sequence of steps. 3. Identify the hazards. 4. Define preventive measures. The analysis should be conducted on all critical tasks or jobs as a first priority. Critical jobs include: Those where frequent incidents and injuries occur. Those where severe incidents and injuries occur. Those with a potential for injuries. New or modified jobs. Infrequently performed jobs, such as maintenance. Job safety analysis is generally carried out by observing a worker doing the job. Members of the joint health and safety committee should participate in this process. The reason for the exercise must be clearly explained to the worker, emphasizing that the job, not the individual, is being studied. Another approach, useful in the analysis of infrequently-performed or new jobs, is group discussion. A work procedure may consist of more than one specific task. In such cases, each separate task should be analyzed to complete a job safety analysis for that procedure. The final version of the safe work procedure should be presented in a narrative style format that outlines the correct way to do the job in a step-by-step outline. The steps are described in positive terms, pointing out the reasons why they are to be done in this way. Reference may be made to applicable rules and regulations and to the personal protective equipment required, if any. Workers who carry out the tasks should be consulted in developing the procedure. Example Job Safety Analysis (JSA) Worksheet Industry: Construction Operation: Road repair Job: Pavement repair Task Who does it Hazards How to prevent injury/accident Operating jack-hammer Joe Doe - noise - vibration - ear protectors - vibration absorbing gloves Applicable Legislation: OH&S Act and Regulations: ___________________________(refer to the act and regulations in your jurisdiction) Date: ____________________________________________ Developed by: _____________________________________

Why is worker orientation important?

Health and safety education should start with worker orientation when a worker joins the organization or is transferred to a new job. It has been found that inexperienced workers, in general, are involved in incidents at a higher rate than others. While experience can only be gained through time, both health and safety education and job skills training can be used to improve this record. Orientation sessions normally cover such items as an explanation of the function of the work unit, organizational relationships, administrative arrangements, and various policies and rules. Items related to health and safety that should be included are: Emergency procedures, including evacuation and first aid. Location of first aid stations. Health and safety responsibilities, including those specified by legislation. Reporting of injuries, unsafe conditions and acts. Use of personal protective equipment. Rights to know about the hazards of their work, to participate, and to refuse hazardous work. Hazards present at the workplace, including those outside own work area. Reasons for each health and safety rule. Any human resources, employment standards, and health and safety-related policies and procedures along with specific procedures ( e.g., absence reporting, hazard reporting, reporting injury or illness, etc.) Support (e.g., who to call when there is an emergency, technical issues, etc.) Security protocols (e.g., how to access workplace premises, after-hour access, etc.) A new employee can be expected to absorb only a certain amount of information in the first few days. Be sure to pace the training to ensure all of the information or skills are learned. Other tips include to provide written information that outlines the points covered in the orientation sessions. It also serves as a checklist for the person conducting the orientation. A buddy or mentor system is useful. This system allows for on-the-job reinforcement of the information presented to the new employee. This process also promotes the safety awareness of the experienced workers who are the """"buddies"""". All workers, but especially new, inexperienced, or transferred workers, should be encouraged to ask questions at any time when doubt exists as to correct procedures or their ability to do the task safely. The orientation should address: What are the hazards of the job? When is job safety training available? What safety equipment do I need to do my job? Do I need to wear personal protective equipment (PPE)? Will I receive training on how to use the PPE? What do I do in case of fire or another emergency? Where do I find fire extinguishers, first aid kits, first aid rooms and emergency assistance? What are my responsibilities regarding health and safety? If I notice something wrong, to whom should I report? Who is responsible for answering safety-related questions? What do I do if I get injured or have an incident? Soon after the orientation sessions, employees should be assessed on their understanding of the items discussed. In this way, both the quality of training and the level of understanding can be evaluated. Continue with education and training throughout their employment, as needed.

How do you design an education or training program?

The objective of education and training is to instruct recipients about health and safety procedures or specific job practices, and to raise awareness or skill levels to an acceptable standard. Occasions when worker education or training may be required are: Beginning of employment. Reassignment or transfer to a new job. Introduction of new equipment, processes, or procedures. Refresher, annual, or periodic education and training to ensure skills and knowledge. When there is a change to the legislative requirements. Inadequate performance. CSA Standard Z1001-18, Occupational Health and Safety Training, also outlines suggested training for supervisors. The standard states that a supervisor """"should be competent (i.e., have adequate knowledge, training, and experience) on all processes and tasks over which he or she is exercising authority. Organizations should define what constitutes an acceptable combination of knowledge, training, and experience in relation to the supervision of others performing tasks."""" Topics that may be included in supervisor training include: Roles and responsibilities - legal and corporate. Internal responsibility system. Hazard identification, hazard control, and risk assessment. Emergency procedures. Incident investigation. Conducting planned inspections. Auditing skills. Training. Planned task observation. Communication skills. Motivation and discipline. Managing workers. Off the job safety. Problem solving skills. First aid. Workplace Hazardous Materials Information System (WHMIS)/chemical safety. Industrial hygiene and medical surveillance programs. Duty to accommodate. When providing training, an instructor should: Receive training in how to instruct. Prepare an orderly plan for instruction. Explain the reasons why each step must be done in a certain way. All instructors should: Plan the session beforehand, break the job down into steps, and have training aids available. Explain what is to be done. Describe all the hazards and protective measures. Demonstrate each step, stress key points, and answer any questions. Have the worker carry out each step, correct errors, and compliment good performance. Check frequently after the worker is working independently to ensure correct performance. Documented correct work procedures are very important in job skills training.

What are workplace inspections?

Workplace inspections help to identify existing hazards so that appropriate corrective action can be taken. Health and safety legislation requires workplace inspections as a proactive action to ensure workplace health and safety. The frequency of planned formal inspections may be set out in legislation. Records of previous incidents and the potential for incidents are factors to be included when determining if more frequent inspections are needed. Supervisors are responsible for conducting their own inspections (for the areas they are responsible for) and for taking action on unsafe conditions and acts as they are reported or encountered. General inspections may be conducted by health and safety committee members or representatives, especially if they have received training or certification. Other criteria for selecting the inspection team are: Knowledge of regulations and procedures. Knowledge of the hazards in the workplace. Experience with work processes involved. Pre-planning any inspection is always worthwhile. Documents, such as previous inspections, incident investigations, maintenance reports, and committee minutes, should be consulted. If a checklist is to be used, it should be reviewed and changed to meet specific needs of the workplace. Checklists are useful aids in that they help ensure that no items are overlooked in an inspection. One type of checklist is the """"critical parts inventory"""". This inventory itemizes parts and items that may result in an incident if they fail. While many ready-made checklists are available in safety literature, it is best to adapt these to your workplace. The health and safety committee should participate in the preparation of these tailor-made checklists. Sample Inspection List Date: ________________________________________________ Location/Department:  ___________________________________ Yes = Satisfactory No = Unsatisfactory, needs attention Yes No Safe Work Practices Yes No Fire Protection Use of machine guards Proper manual lifting Smoking only in safe, designated areas Proper use of air hoses No horseplay Other: _____________     Fire extinguishers Proper type/location Storage of flammable materials Other: _____________     Use of Personal Protective Equipment     Tools, Equipment and Machinery Eye/face protection Footwear Gloves Protective clothing Head protection Aprons Respirators Other: _____________     Lawn mowers Power tools Hand tools Snowblowers Machine guarding Belts, pulleys, gears, shafts Oiling, cleaning, adjusting Maintenance, oil leakage Safe use of ladders/scaffolds Other: _____________     Housekeeping First aid Proper storage areas Proper storage of flammable material (oily/greasy rags, etc.) Proper disposal of waste Floors (clean, dry, uncluttered) Maintenance of yards, parking lots Other: _____________     First aid kits in rooms/vehicles Trained first aid providers Emergency numbers posted All injuries reported Other: _____________     Electrical Safety Chemical Safety Machines grounding/GFI Electrical cords Electrical outlets Other: _____________ WHMIS including SDSs/Labels Safe use, handling and storage of chemicals Dust/vapour/fume control Other: _____________ Other: ________________ Notes: ______________________________________________________ ______________________________________________________ ______________________________________________________ During the actual inspection, both work conditions and procedures should be observed. If a hazard poses an immediate threat is discovered, preventive action must be taken right away, not after the inspection. Notes are made, specifying details of the hazard, including its exact location. When completing the inspection report, it is a good idea to classify each hazard by degree of possible consequences (for example: A = major, B = serious, C = minor). In this way, priorities for remedial action can be established. Workplace Inspection Report Location: _______________________________________________ Department/Areas covered: _________________________________ Date of Inspection: ________________________________________ Time of Inspection: ________________________________________ Item (Location) HazardsObserved Repeat itemYes/No Priority Recommended Action ResponsiblePerson Action Taken Date Analysis and comments: Priority Codes: A - do immediately; B - do within 3 days; C - do within 2 weeks; D - other Inspections serve a useful purpose only if remedial action is taken to correct shortcomings. Causes, not symptoms alone, must be rectified. Corrective action should be taken immediately, emphasizing engineering controls, management failures, or the need for worker education, whatever applies.

What should you report and investigate when an incident occurs?

Occupational health and safety legislation in all Canadian jurisdictions requires that specific injuries and certain categories of incidents must be reported. There may be minimum legal requirements for their investigation. Many organizations investigate other events (e.g., where damage did not involve injuries) and """"near misses."""" The health and safety program should specify: What is to be reported. To whom it will be reported. How it is reported. Which incidents are investigated. Who will investigate them. What forms are used. What education and training investigators will receive. What records are to be kept. What summaries and statistics are to be developed. How often reports are prepared. Incidents are investigated so that measures can be taken to prevent a recurrence of similar events. The investigation represents an """"after-the-fact"""" response for any particular mishap. However, a thorough investigation may uncover hazards or problems that can be eliminated """"before-the-fact"""" for the future. After causes have been determined, prompt follow-up action is required to achieve the purpose of the investigation. Please note: The term incident is used in some situations and jurisdictions to cover both an """"accident"""" and """"incident"""". It is argued that the word """"accident"""" implies that the event was related to fate or chance. When the root cause is determined, it is usually found that many events were predictable and could have been prevented if the right actions were taken - making the event not one of fate or chance (thus, the word incident is used). For simplicity, we use the term incident to mean all of the above events.

What are emergency procedures and how are they established?

Emergency procedures are plans for dealing with emergencies such as fires, explosions, major releases of hazardous materials, violent occurrences, or natural hazards. When such events occur, the urgent need for rapid decisions, shortage of time, lack of resources, and trained personnel can lead to chaos. The objective of the plan is to prevent or minimize fatalities, injuries, and damage. The organization and procedures for handling these sudden and unexpected situations must be clearly defined. The development of the plan follows a logical sequence. Compile a list of possible hazards or scenarios (for example: fires, explosions, floods). Identify the possible major consequences of each (for example: casualties, damage). Determine the required countermeasures (for example: evacuation, rescue, firefighting). Inventory the resources needed to carry out the planned actions (for example: medical supplies, rescue equipment, training personnel). Based on these considerations, establish the necessary emergency organization and procedures. Communication, training, and periodic drills are required to ensure adequate performance when the plan must be implemented.

How do you establish first aid programs?

First aid is generally prescribed under health and safety legislation or workers' compensation legislation. The OSH program must include the following information: Location of first aid stations or medical facilities, and any required supplies or equipment. Identification of first aid attendants. Identification of other staff trained in first aid. Policy on pre-employment and follow-up medical examinations. Procedures for transporting injured workers to outside medical facilities. Provision of first aid training. Procedure for recording injuries and illnesses. A policy on return to work after a lost-time accident might appropriately be included in this section of the program. In general, if injured workers are offered alternative employment: The work should be suitable and productive. The worker's physician must agree that such employment will not harm the worker or slow down the recovery. The worker will pose no threat to other workers. The policy is applied to off-the-job injuries as well. Under no circumstances should the reduction of severity ratings be a reason for initiating a """"modified work"""" program.

How do you prevent violence and harassment in the workplace?

All jurisdictions in Canada have legislation specific to harassment and violence (note that the legislation in the Yukon will be in force in September 2021). Please see the OSH Answers on Violence and Harassment in the Workplace – Legislation for more details. All jurisdictions specify elements required in harassment and violence prevention policies and programs. While there are variations between jurisdictions, there are many common elements such as: Defining violence and harassment. Some definitions include bullying formally Conducting a workplace assessment (a hazard identification and risk assessment) specific to harassment or violence Developing and implement preventative measures Developing a policy and program, implement the program, and corresponding procedures for reporting of an incident Developing a reporting and resolution process, including how to report an incident or occurrence Providing worker instruction, education, or training Determining procedures to ensure confidentiality and privacy Listing supports that are available (internally, externally) Requiring record keeping Using continual review and improvement processes to update the policy and programs Reporting to the jurisdiction, as necessary Including additional requirements for situations such as family (domestic) violence, or working late night hours in retail, gas stations, convenience stores, etc.

How do you promote worker involvement"""
 

Please support us in writing articles like this by sharing this post

Share this post to your Facebook, Twitter, Blog, or any social media site. In this way, we will be motivated to write articles you like.

--- NOTICE ---
If you want to use this article or any of the content of this website, please credit our website (www.affordablecebu.com) and mention the source link (URL) of the content, images, videos or other media of our website.

"OH&S Program - Basic Components" was written by Mary under the Health category. It has been read 27 times and generated 0 comments. The article was created on and updated on 23 November 2022.
Total comments : 0