Stuck in OK to disconnect mode, can't turn on?

Stuck in OK to disconnect mode, can't turn on? I have an IPOD nano and the screen says OK to disconnect with a check mark. When I disconnect it, it seems frozen in this mode and I can't turn it on,off, nothing.
Asked by: Guest \| Views: 189

Total answers/comments: 6

Comments display order:

bert [Entry]

hold down the power and vol down buttons till apple sign appears. Worked for my 6th gen with same issue.

bert [Entry]

"Do a reset. I'm not sure which nano you have, but typically a reset involves sliding the hold switch to hold then back again then pressing the center and menu button simultaneously for 6 to 10 seconds. You may need to repeat this a time or two. Also make sure to be touching only the center and menu buttons, not any other part of the control wheel and push the menu button from only the outer portion of the control wheel, not toward the center. Check out this link to the apple support page where you can select your nano, though the process should be the same:

ZELDA"

bert [Entry]

Press home and power button

bert [Entry]

"Plug your ipod into itunes.

Click on ipod.

Click Restore.

Wait Patiently

Click Sync

All Done!"

bert [Entry]

"Step 1.- connect ur ipad nano to pc or laptop

Step 2.- install itune software to ur pc

Step 3.- select ur device (file ---> add device

Step 4.- click restore

Step 5.- follow the instructions

Step 6 .- solved ur problem.

100% its wrkd.. by FB: bala sam Chennai..."

bert [Entry]

I tried the power & reset button option, the apple logo is visible, after which it goes back to "ok to disconnect" . The local repairer says that it is a hard drive issue. Mine is an iPod black