Home » Questions » Information [ Ask a new question ]

F02 error code washing

F02 error code washing

I have read recent blogs of the "fix" for the F02 error code, which was easy ready and Thank you so much! I found a my son's little sock, pen cap and change in the change trap. So, I thought GREAT, saved some $$ - that had to be problem. Put a load of laundry in and water is coming pouring out of the bottom of washer. Thoughts?.?. HELP Please!!

ANSWERS:

pantherpride, it is possible that you have an improperly installed drain hose. Check your drain hose installation to make sure that it is properly installed. Check to see if your drain hose is stuck way down the standpipe. If the standpipe opening is taped of, it can cause water to be siphoned out of the washer during the cycle.If water is leaking out of the bottom of the washer, unplug the washer and remove the bottom front panel. Once the panel is removed, check the tub, door boot seal, the hose between the tub and the drain pump, the drain pump and the drain hose. If you need to , you can get the service manual from here and there are more images on on this question. Hope this helps, good luck.

Asked by: Guest | Views: 41
Total answers/comments: 0