Headlight removed the 2 screws but something else is holding it in pla

"@bratsypatsy041 post some pictures of what screws you removed from where. That way we can see what you see. Use this guide Adding images to an existing question for that. I've replaced plenty of bulbs as well as the complete assembly from my Jeep by following this:

REMOVAL

(1) Remove jack screw attaching top of headlamp to headlamp mounting module (Fig. 15).

(2) Grasp upper inboard and lower outboard corners of headlamp (Fig. 16) and forcefully pull headlamp

outward.

(3) Remove all bulb sockets from headlamp module.

(4) Separate headlamp from vehicle."