|
Headphone jack board connector pinout
I ripped the connector off of the ribbon cable for the headphone jack and I cant find any replacement parts. So, I am going to attempt to bypass the ribbon cable connector by soldering to the test pads on the ribbon cable. I've found that pads 6,7,8 go to sleeve, ring, and tip respectively. I would like to solder wires from these pads to the correct pins on the connector socket on the logic board but cant find any information on which pins are the right ones. Nor is the ribbon cable made in a way that I can trace the pads to the (now gone) connector.
answers:
| 