How do I open up a Mighty Mouse?

"Actually, a Mighty Mouse can get more gunked up than the turn-it-upside-down-and-roll-it technique can fix. I've taken two apart and found the little plastic rollers, that the pea abuts, get fuzz and stuff wound around them just like the good old roller-ball mice used to.

Here's a pretty good YouTube video with instructions:

http://www.youtube.com/watch?v=Jet7488Uo...

I reassembled the mice, using little dabs of glue, but didn't bother reinstalling the plastic ring; hopefully that'll make it easier to take them apart the next time."

"Take a pad with rubbing alcohol and rub the ball thoroughly, as there might be some debris and dirt caught under it prohibiting it from moving. Otherwise http://www.mightymouserepair.com has a guide or my personal favorite...

http://shirster.multiply.com/journal/ite...

good luck!"

"I've had very good luck using a high-nap towel or microfiber cloth and a little cleaning solution to fix this issue:

1. Dampen one section of the towel or cloth with some iKlear, windex, or water. You want a slightly damp area and a dry area.

2. place the towel on a hard level surface, turn the mouse upside down and roll the scroll ball vigorously in all directions for several minutes, alternating between the damp and dry areas.

3. Test for restored function, repeat as necessary.

BTW: I've taken a few completely failed mighty mice apart, but the newer ones have plastic weld tabs on the bottom ring, making it almost impossible to reassemble the device in a working manner - the ring is the gliding contact point for the bottom of the mouse, so it has to be level and firmly attached."

"riDerz

nice job, I know you have fixed it, but next time try this:

1. get a thick WHITE paper, thickest you can find

2. put the paper somewhere stable

3. put the scroll ball (gray ball) on it (holding the mouse opposite-down)

4. move it around with pressure in different direction for a minute.

5. SORTED"