|
No sound from Mitsubishi DA-R25 stereo receiver
Purchased new in 1984 and has been in storage for the last five years. Thought I would hook it back up. Connected the speaker cables to the back of the unit, turned it on but no sound. FM tuning was on full strength signal, checked out all control settings, everything was as it should be. Anybody have and ideas why I'm not getting any sound out of the unit? Thanks !
ANSWERS:
"Lets look for the simple stuff first...
1) Check for a tape monitor switch and be sure that it is no engaged.
2) Check the tape out connectors for a signal (a signal should be present even with no output from the amp section.
3) Verify that there does not need to be a shorting plug from the pre-amp to the amp. Many (including myself) have been bitten by this one when one forgets that an EQ used to be in the mix...
If all of the above are OK, then we may need to open this unit up and take a look.
Let me know what you find and we'll continue from there. Also, if you can post a picture of the boards, that might help too.
Dan"
| 