all boot option option tried. press f4 for recovery

Go to bios setting > boot> disabled secure boot>os made selection >cms and uefi os > save and exit Enjoy....

"yes you can provided that the HDD is not damaged ....

To use a Pendrive You will need a 4GB+ USB flash drive for this procedure. then create your bootable USB Disk for the windows Or a windows 8 DVD disk

Then Follow below:

Shut down the computer and reboot into the BIOS by pressing F2 repeatedly immediately after pressing the Power button. Under the ""Advanced"" tab, set Fast BIOS Mode to Disabled. Under the ""Boot"" tab, set Secure Boot to Disabled, then OS Mode Selection to CSM OS. Then select ""Boot Device Priority"" and move USB HDD to the top. and Save your settings then restart

The computer should restart and boot from your USB drive into the Windows installation. Go through the prompts and choose the custom installation option and when it asks where you want to install Windows, click ""Drive options (advanced)"" and delete all the partitions on the drive and create your desire

The installation will go through and then restart, remove the USB Drive and reinsert it when the Win Logo appeared (If you don't remove the USB disk, you will end up at the initial installation prompt again)

Once the installation is finished you can go to Samsung site and search your ur lap model missing drivers and download them.

TIPs:

reboot into the BIOS and set Fast BIOS Mode back to Enabled (but keep Secure Boot disabled and the OS Mode as CSM OS) and you're done!"

"SOLVED:

I had the same problem on my Samsung laptop after I cleaned out all the partitions and reinstalled windows from a USB. The process required legacy USB.

After a flawless install I couldn't boot from the HDD.

I found that I could boot the OS on the HDD by plugging in the bootable Win USB and ignoring the ""press any key to boot from USB"".

After booting into Win from the HDD, I repaired BCD using Visual BCD, a free program. If you cant boot into windows, you can still make the HDD bootable by manually editing the BCD entries.

Then I went into command prompt and converted MBR disk to GPT using MBR2GPT command. This command will work only if the disk is a system (bootable) disk.

Then I shut down windows, removed USB, set Fast BIOS to enabled and disk type to UEFI.

The problem was that I made a single partition on HDD manually and windows never made a EFI boot partition on the HDD.

Hope this helps"

"I had the same problem, was very annoying. I tried every solution one of them temporarily helped.

Finally I got enlightened and replaced the CMOS battery. Now everything is perfect.

(OMG same battery for 6 years)"

"Hello,

I have the same problem.

My Samsung Ativ 9

Wont be able to go to Bios,

I repeatedly press F2 or f4

Nothing works.

It has this Loop Error,

I remove the SSd and it says

""All boot options are tried. Press f4....""

Then it shutdown

I cant go to the BIOS

I have Set Fast Boot"

i am also having the same problem all boot options are tried. press f4 key to recover with factory image i tried all the keys f4 i cannot boot into bios, and all this started when i changed booting order in BIOS, please help