|
S5-44 IWatch's Display won't turn on after replacement , issue rooted.
I have replaced the glass of an S5 44 Display. after the display was ready I have connected only the display ribbon cable to check the OLED display. apple logo appeared and everything was fine for moment, after that the display went dim and won’t turn on again although the watch is working , I have confirmed this since I noticed the vibration. I have disconnected the ribbon cable and noticed LOCA still inside, so I removed the ribbon cable and cleaned it thoroughly, the problem persists. I have another watch that I removed the display from to check whether it is the display or not. the repaired display worked just fine on the other watch however both displays won’t work on the watch that I have mentioned at first. any thoughts on this !
| 