50 panasonic Viera model no.TC-P50C2 won't turn on. red light blinks

Pull the plug and with the power disconnected hold the power button on for 60 seconds. After at least the 60 seconds plug the tv in and try to start it. If it works great if not , hold the power button in the on position for a count of 20 with the tv plugged in . If theres still no Joy try power with one of your volume buttons at the same time . One of these should provide a hard reset for the tv. Hope this helps

"Do 1 & 2 together.

1] Press and hold in the on/off switch.

2] Press and hold the red button on the hand set for 30 seconds.

This will reset the PANASONIC TV.

This solution cost my £85 and the techy was in and out of my house in 5 minutes!

Robbery."

"ttibal, get the multimeter out:-)

5 blinks condition can be caused by:

Missing P5V

A short of the P5V

A short of the Vda line (Note: missing Vda from the P board does not cause 5 blinks)

Wrong diagnostic by the D board

check the voltages as indicated. Attached documents will show how to test each one of the boards for the 5 Blink error code.==>> LED-5-Blinks.pdfLED BLinks 5X <<=="

"You have to unplug the tv for at least an hour. (The longer the better) after that, you have to hold down the power button from the tv (not the remote) while the tv is still unplugged for 60 seconds after 60 seconds continue to hold down the power button and plug it in. Keep pressing the power button for another 60 seconds. A blue or red light depending on the model should pop up. If it didn’t work in that time frame you can try and hold it down longer.

If that didn’t work, then you have to hold down the power and the menu button on the tv at the same time while the tv is plugged in until a blue or red lights pops up and the tv turns back on.

Hope this helped you guys!"

Turn the TV off, then press the TV on button and remote on button at the same time. I guarantee it will work.

2021 and your still fixing TVs. Thanks very much power and volume worked for me here in Scotland