dishwasher will not start

"Reset it by pressing the keys HEATED DRY - NORMAL - HEATED DRY - then NORMAL again in sequence within 5 seconds. All the lights should come on and it will begin a diagnostic cycle. Either let it run, or press cancel and the board will be reset so you can try a wash again. If this fails please give us the model number located inside the door

Also try this:

1) Crack the door open.

2) Within 3 seconds press the following sequence - Hi Temp Scrub, Energy Saver Dry, Hi Temp Scrub, Energy Saver Dry

3) Close and latch the door

4) Press the cancel button (the circle with the triangle in it)

."

"Hi @ shaun melton

If there is power at the dishwasher, then there may be a problem with the door latch contact not making properly or faulty, preventing the dishwasher from starting.

If there appears to be no power at the dishwasher it may be a problem with the high limit thermostat."