Home » Questions » Information [ Ask a new question ]

HDD Temperature sensor gone in 2011 iMac?

HDD Temperature sensor gone in 2011 iMac?

It looks like the temperature sensor in the iMac for the hard drive if now gone in the teardown - can iFixit confirm?

Asked by: Guest | Views: 138
Total answers/comments: 3
mcgyver89 [Entry]

"Timothy Poon



Rep: 107




2


1"
mcgyver89 [Entry]

"Y splitter cable works if you are upgrading to SSD. I don’t know why Dan keeps recommending OWC cable. maybe kickbacks from OWC. it’s overpriced and meant to take advantage of naive user.

more info about this sc*m can be found here

https://www.youtube.com/watch?v=pMsk1o1W..."
mcgyver89 [Entry]

"Thanks Hanno for this hint!

It should be noted here that on the SATA side of the cable the wires 1 and 4 have to be shorted (and NOT wire 2 and 7). This is much easier then Apple's official solution where you have to take the iMac almost completely apart.

For better understanding I have added below some (low resolution) photos. (Sorry for the bad quality).

CAUTION!!! This modification is ONLY VALID when you switch to a solid-state drive (SSD).

DO NOT use this mod to connect a normal harddisk drive! This will most likely result in massive overheat of your iMac."