touch screen not working (even after replaced screen/digitizer)

touch screen not working (even after replaced screen/digitizer) Two weeks ago my iPad stopped responding to touch (as far as I know, nothing happened to trigger this. I didn't drop it, it just stopped working). Tried restoring. Nothing.
Asked by: Guest \| Views: 277

Total answers/comments: 3

Comments display order:

Guest [Entry]

Did either of you ever get a fix?

Guest [Entry]

replaced screen and phone comes on but no response phone worked with broken screen. Replacement was only $12 could it be a junk screen

Guest [Entry]

I had a similar issue with the IPAD 3…I ended up using WD40 electrical connection cleaner on all parts (Cable/Board)…On the cable end I used a eraser end and cleaned again with the WD40 Electrical cleaner. Put it all back together again and it worked….At least for a few weeks/month…Then it did it again….I am going to make sure the holding tape on the ribbon cable is there this time I replace the digitizer….I believe it must be a connection thing…..