Blank screen with only the standby light on. Not on at all.

"jubril olabode, Reset procedure to try:

1. Hold (menu) and (vol-) button on the side of the TV

2. while holding these, press the power button on the side of TV (NOT remote)

3. Blue light comes ON and stays ON

4. Wait 10 seconds then let go of (menu) and (vol-)

5. wait another 30 seconds and some type of picture should appear, If that does not work, unplug TV for 10 minutes and then hold power button on TV for 60 seconds, plug in and turn on

If this does not do it, take the back of the TV and check for possible bad power supply/capacitors on the boards or you may have to replace board. See video links below for more detailed info. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

https://www.youtube.com/watch?v=wEWzYLaK...

https://www.youtube.com/watch?v=tqvjkq5v..."

Join the class action law suit against them. Mine did the same thing, 6 million people have joined the suit but when I contacted to see just which two capacitors needed to be replaced, they acted like they had never heard of the problem.

Hi mybe you guys can help me i have a samsung smart tv 55 inch flat screen nou bystand power then i push the mainboard conerionblock down voltage apear how to fix please help

Vise led VKT 43U 501 model led is in stand by mode. All initial voltages are ok. After pressing stand by bottom several time , led light blinks once a time and pwer supply on/ off voltage came and again drop.

Hi..my tv switches off after every 10 seconds…seconds ps help