Home » Questions » Computers [ Ask a new question ]

Home button doesn't work when pressed but fingerprint scanner does?

Home button doesn't work when pressed but fingerprint scanner does?

I replaced the screen for a 5s and when I was done, the home button wouldn't respond when I clicked it. But then my client tried to click it and it responded to his fingerprint and unlocked the phone.

Asked by: Guest | Views: 207
Total answers/comments: 5
Guest [Entry]

"Hello Ryan on the back of the home button there is a small black nub, if it is flush with the back of the home button it will not work, if it is raised then there is another problem, it may need replaced.

Word of warning if you replace the home button your 5s the Touch ID will never work as every handset has its own personal button.

Hope this helps

David"
Guest [Entry]

Hi guys, there is a small connectors under the screw, should put it in the home position .
Guest [Entry]

"Hello ryanbandrowski,

Please check whether home button cable fixed properly to logic boardChange the home key and try again to you can determined where is the problem coming from as a temporary solution until fix the key you can use assertive touch function on behalf of home key

https://support.apple.com/en-ap/HT202658"
Guest [Entry]

"I have the same problem, and I know now that I misplaced the screen shield screws, because I had the bluescreen issue, but put screws back where they belong and seemed to work fine except for the home button. Finger scanner works, but not the home button. Are there any traces on motherboard under that screen screw that is related to home button or am I chasing my tail here. Tried reconnecting xx amount of times to no good. Tried swapping home button to no use , then the finger scanner died too ofcourse so put stock home button back so at least the scanner is working now. Should I go aheadand change the Lightning dock connector that home buttons connect too, or do you guys think its related to motherboard trace issues??

Robert"
Guest [Entry]

Ryan, did you ever find a solution to this? I am having the same issue after replacing my battery.